How to Change Battery on Verifi S6000

Quick 5-step process to replace 4 AA batteries and restore full operation.

Verifi Smart Safe S6000 battery compartment location

Quick Answer

To change Verifi S6000 batteries, open the safe, locate the battery compartment inside the door, unscrew the cover, replace 4 AA batteries following polarity markings, then test and reassemble. Takes about 5 minutes.

What You'll Need

  • Tools: Small Phillips screwdriver
  • Batteries: 4 high-quality AA batteries (alkaline or lithium)
  • Time: ~5 minutes

Battery Replacement Steps

  1. Open the safe completely using your enrolled fingerprint or backup key access.
  2. Locate the battery compartment on the inside of the door (typically upper section).
  3. Remove the compartment cover by unscrewing the Phillips screws (store screws safely).
  4. Replace all 4 batteries at once, ensuring correct polarity alignment with markings.
  5. Test sensor function before replacing cover, then secure compartment with screws.

Battery Tips

  • Use quality alkaline or lithium AAs; don't mix old/new or brands
  • Replace all 4 simultaneously for even power delivery
  • Keep spares on hand once low-battery alerts begin
  • Test the fingerprint sensor immediately after replacement

Need replacement batteries or a backup Verifi S6000?

Check Verifi S6000 Price →

More help: