Quick Answer
To bolt down a SentrySafe QAP1BE, choose a level location, mark bolt holes using the safe as a template, drill holes with masonry bits, install concrete anchors, and secure with bolts. Takes about 15 minutes.
Safety First
- Wear safety glasses when drilling concrete
- Check for electrical wires and plumbing before drilling
- Use proper lifting techniques - The QAP1BE is roughly ~12 lb unloaded
- Ensure surface can support the safe's weight when loaded
Required Tools & Materials
Tools:
- • Drill with hammer function
- • Masonry drill bits
- • Socket wrench set
- • Level
- • Measuring tape
Materials:
- • Concrete anchors (¼" or ⅜")
- • Washers
- • Mounting bolts (included)
- • Pencil for marking
Installation Steps
- Choose optimal location: Select a level, solid surface in a closet or low-traffic area away from windows. Floor mounting is preferred.
- Mark drilling points: Position safe in final location, use level to ensure it's straight, then mark bolt holes through mounting holes.
- Drill anchor holes: Remove safe, drill holes to anchor depth using appropriate masonry bit size for your anchors.
- Install concrete anchors: Insert anchors flush with surface, ensuring they're properly seated and aligned.
- Secure and verify: Position safe over anchors, insert bolts with washers, tighten firmly, then test stability.
Pro Installation Tips
- Floor mounting is more secure than wall mounting for this model
- Use all available mounting points for maximum security
- Apply thread locker to bolts to prevent loosening over time
- Test the lock mechanism after installation to ensure proper operation
- Works on wood subfloors? Use lag bolts with blocking for wood, not concrete anchors
Need mounting hardware or a SentrySafe QAP1BE?
Get the QAP1BE & Hardware →